Grimas | Stitches

MODELLING

Apply the Derma Wax in a lengthwise direction. Smooth the edges flat so that grease and moisture can not get underneath. Smooth the Derma Wax surface and edges off with the fingertip, using a little bit of Grimas Cleansing Cream.
Dab all over with a dry, clean make-up sponge. Doing this, you remove the excess Cleansing Cream and you create a skin-texture effect.
Powder the whole with a make-up sponge with Grimas Transparent Powder to matt and fix it; then turn the sponge over and continue dabbing with the clean side until the excess powder has been removed.

DERMA WAX = Derma Wax

CLEANSING CREAM / SKINCARE CREAM = Cleansing Cream

= Transparent Powder

Cut a black thread into ten pieces of 10 cm. Press the threads into the Derma Wax next to each other (keeping the threads taut). Smooth out the nicks that this makes in the Derma Wax.

FINISHING

To create an 'open wound', the Derma Wax construction has to be 'cut open' with the sharp side of a Derma Wax spatula. Lubricate the tip of the spatula with a little bit of Cleansing Cream. This will allow the spatula to slide more easily through the Derma Wax, preventing it from sticking to the spatula. To add a suggestion of depth to the 'wound', colour the bottom of the wound using black make-up. Then you colour the inner side of the wound with dark red make-up (Grimas Water Make-up Pure or Crème Make-up Pure). Press the 'wound edges' back up against each other.

Tie the threads together very carefully. If necessary, use tweezers to take hold of the threads.
Cut off the loose ends.

> Stitches